Chapter 204: 204： 204: Hydraulic Workshop (third more! Ask for a recommendation ticket! Monthly ticket! Subscribe!)

In the windmill, Aslan watched as Saxon was carefully operating the grinding plate to grind the cooked and sun-dried buds into powder, while Luomen next to him was very excited.

This windmill was hosted by Saxony, and Lomen was responsible for the construction.

This is a historic moment for the Merlot region, no, even for the entire Mellock province.

The royal family has always adhered to the policy of strong and weak branches. In order to maintain its technological advantage, the provinces directly under the royal family have not only the most advanced weapons and equipment, but also production equipment, such as the windmill in front of them.

It has been popularized in Kyoto for several years, but it has not spread to the land of other lords at all.

Regardless of the fact that windmills only help farmers to grind grain, they have liberated a lot of labor, and the speed is more than ten times faster. This has trans-era significance for agricultural production.

"Very good! Everyone who participated in the construction of the windmill will be rewarded with ten gold coins."

Aslan spoke directly, immediately drew a burst of cheers.

"As for the construction of the windmill in Saxony, without your presidency, can the people under your hands preside over the construction of the windmill on their own?"

Facing Aslan’s inquiry, Saxon groaned, nodded, pointed at the young man next to him, and said: "Lord Lord, this kid is my son, Laurensen. He has inherited 60 to 70% of my skills, if Let him preside over the research and development, or there is some lack, but preside over the production, there is no problem at all."

"That's great. Let Lawrenson take responsibility for this matter." Aslan smiled and nodded to the young man next to him, and said to Luomen: "How is the sewer construction going? Can't get out?"

Luomen and Saxon were instantly beaten up, and if they wanted them to join forces at the same time, it must be another major project, and it was also a kind of technological innovation.

Luomen hurriedly said: "The excavation of the sewers and tunnels has all been handed over to my deputy. Especially with the assistance of the rat people, the efficiency of digging the sewers and tunnels has increased more than ten times. They even took the initiative to apply for overtime."

Aslan nodded and said with satisfaction.

"Then I will tell you when I go back to the industrial zone, yes, it's okay to work overtime, but you must have enough shift rest, don't tire people to death, I want to rely on them to continue to work for me in the future."

The construction of the reservoir and the digging of channels are the real big projects, and the tunnel to open up the Gulun Mountain can only be regarded as a small project in front of it.

"These two items have been constructed according to the plan, even if the subordinates are not present, it doesn't matter." Luomen said confidently.

This is what Aslan asked at the beginning to train more capable deputies. After all, the scale of civil engineering is huge, and if he really wants him to run one by one, it will be exhausted sooner or later.

As for the channels in Luomen's mouth, the main sources of water are the Meli River and Lake Belial.

"That's good!"

Aslan brought Lomen and Saxony back to the industrial zone. The industrial zone has now doubled in size. The periphery is mainly made up of breweries and furniture factories, mainly to cover people's eyes, and the interior is the industry of Merlot. The essence lies.

The steel plant has become a large-scale steel plant, and it has also successfully mastered the steel filling technology. The steel production scale of Merlot has greatly increased. It is no exaggeration to say that the steel output alone is not as good as that of Merlot.

Nowadays, Sino Continental mainly uses the block smelting method. The steel smelted is iron smelting carburized steel. The quality of this steel is not good enough. How much carbon penetrates during the refining process, whether the distribution is uniform, and the degree to which impurities are removed. , Are very difficult to master, and the production efficiency is extremely low.

You are reading story The Lord Who Wants to Be Emperor at novel35.com

The technology of the dwarves is mainly based on hundred steel making, which is to repeatedly heat and fold and forge the block of iron to make the structure of the steel compact, uniform in composition, and reduce impurities, thereby improving the quality of the steel.

In fact, the dwarf's steelmaking is mainly based on forging. In order to ensure the quality of the weapon, it even takes more time.

This is why it is often said on the mainland that products produced by dwarves must be fine products.

The steel filling method and technology brought by Aslan not only improved the quality of steel again, but also increased the output of steel.

Today, the blade of the ring first knife is made of steel produced by a steel injection method. The only thing that makes Aslan helpless is that the industrial foundation of the entire Billy area is too weak, otherwise he intends to use the converter to make steel, so that he can truly Significantly increase steel output.

In 1856, the British Besmer invented the bottom-blowing acid converter steelmaking method. This method was the beginning of modern steelmaking. It produced a large amount of cheap steel for mankind and promoted the industrial revolution in Europe.

Therefore, the meal can only be eaten one bite at a time, and one meal cannot be fat.

In the magic school in the middle of the industrial zone.

Aslan and Lomen were discussing and drawing drawings, and soon called Saxony and Greenwa to come over.

They were stunned by Aslan's design philosophy.

Waterwheel forging workshop.

This is what Aslan wants to manufacture now. As long as it is produced, the forging work will be much easier in the future. The most important thing is to increase the forging speed.

The reason why European plate armor can be popularized so that ordinary soldiers can afford it is all because of the emergence of hydraulic hammer forging machines.

The reasons that have troubled the scale of the development of knights have always been that apart from personnel training and war horses, knight armor is also very important. If the hydraulic hammer forging machine appears, Aslan is confident that the knight armor of hundreds of gold coins can be created by 50 gold coins. If the scale of production increases, the price can be reduced by another 30%.

With the addition of the huge pasture of the Northern Wind Prairie, Aslan firmly believes that he will be able to arm the largest army of knights in the history of the Kingdom of Cleveland.

In the previous life, Aslan's Holy Wind Knights had a peak number of 100,000 knights. For one charge, even the great knight instructor had to avoid its edge.

"Lord Lord! You are such a genius." Saxon knelt at Aslan's feet excitedly.

Aslan kicked Saxony away, and said angrily: "Stop talking nonsense, I didn't want you to send me flattery, and immediately find a way to make this hydraulic forging workshop."

Saxon smirked, and quickly got up to discuss with him.

The most important thing here is the waterwheel. As long as the waterwheel is made first, Aslan can use it to make more things.

For example, turning the spinning wheel into a spinning wheel can instantly increase the existing textile output by more than ten times. I believe that it can not only satisfy the winter clothing of the entire Merlot area, but also allow the production of cloth in the Merlot area to circulate to the entire kingdom and even the entire continent.

At that time, he was truly rich and invincible.

You can find story with these keywords: The Lord Who Wants to Be Emperor, Read The Lord Who Wants to Be Emperor, The Lord Who Wants to Be Emperor novel, The Lord Who Wants to Be Emperor book, The Lord Who Wants to Be Emperor story, The Lord Who Wants to Be Emperor full, The Lord Who Wants to Be Emperor Latest Chapter