Chapter 33: Chapter 33 New Gear

Date 2275 August 24

 

*Yawn*

 

“Hauler, what time is it?” I asked Hauler as I was just waking up.

 

“It’s 6:30 am boss.” Hauler answered.

 

“Okay thanks, Hauler.” I replied.

 

“No problem boss.” Hauler said lastly before I started getting up to get ready for the day.

 

Once I was up and had taken care of my hygiene I got something to eat and took a walk through my home physically to see how things were progressing. After I had walked through a majority of it I saw my bots had the whole facility cleaned up so I assigned the cleanup crew a task to start reinforcing the building and to replace all the windows with armored plates since I had no way of replacing the glass windows and they would a bit of a security vulnerability if I were to do that. 

 

Also if I or Amata want something similar to a window later on I can just have my robots install screens where the windows were and have cameras on the exterior of the building so we can look outside without reducing the building's defenses.

 

When I was done assigning my worker bots their new tasks I headed over to the manufacturing area and continued my work from last night but before I started I sent out a signal with mechu-deru to have any newly produced worker bots to start assembling and production of more automated ammo manufacturing machines since I wanted to get my production capacity up to 1,000,000 rounds a day.

 

I then spent the next 6 hours fabricating and constructing my new set of power armor which ended up looking like an amalgamation of an X-01 power armor suit, an Mk X Power Armor suit from warhammer 40K, and lastly an enlarged version of my Exterminator Helmet with some additional upgrades. As for the stats the power armor ended up having I would have to say I knocked it out of the park this time.

 

| Annihilator Power Armor |

 

Resistances: DT 500

S.P.E.C.I.A.L: +8 Strength, +2 Perception

Skill: +50 Energy Weapons, +50 Explosives, +50 Guns, +25 Medicine, +150 Sneak, +50 Survival

Class: Heavy

Weight: 2,000

Value: 1,000,000

 

Item Description: A large jet black colored power armor that took inspiration from X-01 Power Armor and the Mark X Power Armor from warhammer 40K as well as a scaled-up version of the Exterminator Helmet. The armor features significantly more armor than any previous known power armor iterations, though it is entirely made from an advanced metal alloy so the weight of this design is much heavier than any other power sets by a significant margin, with spiked pauldrons and shins for close combat, electromagnetic shielding over every component to prevent the armor from being disabled, a custom built heavily armored fusion breeder reactor, electrified spiked gauntlets that can either stun a target or disable one permanently, an integrated stealth field that can turn the user invisible, a nuclear propulsion jetpack, a war belt with many magnetic attach points to hold all sort of different things, magnetic soles that can be toggled, a specially designed weight dispersion system, a chemical injection system and lastly a standard power armor frame that was enlarged to fit its creator, the frame was also reinforced and upgraded with much better servos and hydraulics to support the new armor. As for the power armor helmet, it features all the features its predecessor had such as the air/gas filter, integrated rangefinder, turret targeting modules, voice modulation module, and night and thermal vision though all the features listed have all been enhanced. The power armor helmet also has a few new additions, those being the addition of a rebreather, an integrated encrypted radio, and an AI assistant that can administer chemical aid. Designed by Harold Todd Woods.

 

I added and upgraded all I could for the moment given my current fabrication and manufacturing capabilities. Though once I make lithography machines I’ll be able to make some additional upgrades but that won’t be happening for a bit since I still need to get a few things before I can start making them and I also need to get a clean room setup.

 

*Growl*

 

Well, now that I’m done fabricating my power armor my stomach is informing me that it’s time for lunch so I better go get some. I then headed off to Hauler's cabin to make something to eat.

 

Sometime later.

 

*Burp*

 

Ahh, that was a good lunch but time to get back to it since I got a lot that needs to get done still that being a second smaller suit of Annihilator Power Armor and some better under armor that will fit inside the power armor frame. I think I’ll just make something similar to the Chinese Stealth Suits since they’re pretty slim already and have stealth capabilities but I’ll be adding additional armor to the suits wherever I can fit it as well as some other improvements.

 

Once I was finished with lunch I got up and headed back to the manufacturing area to continue fabricating the power armor set that will be used by Amata and by the time I got there my worker bots assigned to the manufacturing area had just finished getting another automated ammunition manufacturing machine up and running which increased my ammo production capacity by an additional 100,000 rounds a day. 

 

So before I got to work I used mechu-deru on the manufacturing machine. About 5 hours later I had Amata’s power armor made though it had lower stats than mine since it was smaller and didn’t have as much armor, it was also more feminine in design and had a different style of helmet. After that, I spent the next hour working on my stealth armor and as soon as that hour had passed I paused my work and got up to get something to eat for dinner.

 

A little later I finished dinner so I got up and got a good workout in by filling my inventory with metal and enabling the weight to be felt via my Pip-Boy. When I was done working out I emptied my inventory and gave everyone back in Vault 101 a ring to see how they were doing and a couple of seconds later the overseer or otherwise known as my future father in law picked up so I talked to him about various things before I told him what time I thought I would be arriving at Vault 101 tomorrow and once I told him that we talked about a couple more things before I said my goodbyes and wished him a good night.

 

When I got off the radio I got a few things in order before I headed back over to the manufacturing area and continued to work on my stealth armor. After about another hour I had finished work on it and the stats it ended up having were not too bad for an armor I made really just to be used with power armor.

 

But I did give it good stealth capabilities since if I ever had to abandon my power armor which I don’t think I would given my power armor’s stats, it would allow me to slip away easily since it could turn invisible and had better stealth capabilities than a stealth boy and a chinese stealth suit combined.

 

| Shadow Armor |

 

Resistances: DT 50

S.P.E.C.I.A.L: +1 Agility

Skills: +150 Sneak

Class: Medium

Weight: 50

You are reading story Welcome To The Fallout Wasteland at novel35.com

Value: 49,000

 

Item Description: A slim pitch black armored stealth suit with an integrated stealth field based off of the chinese stealth suit and stealth boy designs that was then improved upon by the armor’s creator making the armor completely invisible to the human eye. The armor’s stealth technology is powered by a microfusion breeder cell. Designed by Harold Todd Woods.

 

I looked at the stats for a few more seconds before I started working on Amata’s suit next. After about a little more than an hour's time I had her shadow armor finished in half the time it took to make mine since it wasn’t my first time making it and it was smaller than my own by quite a bit.

 

Now that that’s completed I think I’ll upgrade my AER 18 LMG since its due for an upgrade and when I’m done overhauling it I’ll start making a new melee weapon and the time I have left after that I can work on adding emp shielding to the other power armor suits so they won’t be susceptible to pulse weaponry in the future.

 

Several hours later I finished overhauling my AER 18 LMG that ended up becoming a different weapon due to me going a bit nuts with the modding and redesigning. I had also just got done making my replacement for Guillotine a few seconds ago and the stats both weapons had were a substantial upgrade from the weapons they were replacing.

 

| AER 29 LMG |

 

Damage: 80

DPS: 2,000

Fire rate: 1,500 (Can be set to semi)

Capacity: 250

Capacity Drain Rate: 20 (Only relevant for full auto)

Regen Rate: 40

Reload: 0

Weight: 28

Ammo Type: Microfusion Breeder Cell

Value: 29,500

 

Attachments: Canted Red Dot Sight, Laser Sight, Variable Zoom Scope, Vertical Fore Grip, Weapon Sling

 

Item Description: A large double-barreled laser light machine gun based on the AER 18 LMG that was then modified and upgraded with beefier barrels, improved microfusion breeder cells, hardier materials, rails for mounting attachments, and a toggle to change the laser beam from a visible red to an invisible infrared laser. Designed by Harold Todd Woods.

 

| Severance |

 

Damage: Variable

DPS: Variable

RPM: 10,000 - 30,000

Weight: 200

Value: 25,000

 

Item Description: A massive 6-foot long, 1-foot wide, and 3 inches thick two-handed double-sided chainsword with large hardened saw teeth installed to rip and tear while also being powered by a single microfusion breeder cell. This weapon can cleave through steel like a hot knife through butter but one has to be able to handle the weapon's weight for that to be possible. Designed by Harold Todd Woods.

 

Now that I’m done with that I think I’ll upgrade my combat knives and when I have my combat knives modified I’ll see how my robots are doing with the tasks I assigned them.

 

I then spent a short amount of time making new blades out of the advanced alloy I discovered a short while ago via my science and repair skills increasing and once I had the new blades made I fabricated some spiked knuckles.

 

When I had finished making all the required parts I swapped out the original blades and put them off to the side before I then inserted the new advanced alloy blades into the existing handles. After that, I attached the spiked knuckles to the handles of the combat knives, and finally, when all the parts were in place I checked the stats of my new knives to see how I did this time.

 

| Commando Knife |

 

Damage: 43

DPS: Variable

Weight: 2

Value: 1,350

 

Item Description: A 18-inch hardened advanced alloy combat knife with spiked knuckles around the handle of the knife for whether the wielder wants to slice, stab or bash.

 

“Not too bad, definitely an upgrade from what I was using before.” After spending a couple more seconds looking the stats over I swapped my primary focus over to my robots that I was connected to with mechu-deru and checked their progress.

 

What I saw through their vision was my robots converting the power plants in the basement from fusion to fusion breeder as well as the ongoing construction of a growing area that from my estimations should be able to produce 10 tons worth of food every time the crops are harvested. I’ll definitely need a massive freezer to be able to hold that amount of food. 

 

Hmm, I think I'll just have the robots currently working on getting food production up and running and start construction of a huge walk-in freezer once they’ve completed their current construction task.

 

As soon as I finished queueing up several more tasks for my robots to handle I checked my other robots progress and saw that they were all progressing nicely with their currently assigned tasks so I headed to bed a bit earlier than usual since I wanted to get to vault 101 as early as possible tomorrow to have some extra time to spend with everyone.

You can find story with these keywords: Welcome To The Fallout Wasteland, Read Welcome To The Fallout Wasteland, Welcome To The Fallout Wasteland novel, Welcome To The Fallout Wasteland book, Welcome To The Fallout Wasteland story, Welcome To The Fallout Wasteland full, Welcome To The Fallout Wasteland Latest Chapter